In Need Of A Tanning Station Enshrouded Not Working

Caroline Mae

2 min read

·

06-01-2025

1

0

Share

Finding your tanning station malfunctioning can be incredibly frustrating, especially when you're relying on it for a consistent, safe tan. Let's troubleshoot some common issues and get your tanning bed back in action.

Common Problems and Solutions

Before you panic and call for expensive repairs, let's tackle some easily fixable problems.

Power Issues:

• Check the power cord and outlet: The most obvious culprit is a faulty power cord or a tripped breaker. Examine the cord for any visible damage, and ensure the outlet is functioning correctly by testing it with another appliance.
• Circuit Breaker: Check your home's circuit breaker box. A tripped breaker might have cut power to the tanning bed. Simply switch it back on. If it trips again immediately, you may have a more serious electrical issue.
• Power Surge: A power surge can damage the internal components of your tanning bed. If you experienced a recent power outage or storm, this might be the cause.

Lamp Issues:

• Burnt-out Lamps: Tanning bed lamps have a limited lifespan. If your tanning bed is older, or if you've used it extensively, the lamps might need replacing. Check the manufacturer's instructions for lamp replacement procedures. Important: Always use lamps specifically designed for your tanning bed model.
• Lamp Wiring: Loose or damaged wiring connecting to the lamps can prevent them from working. If you're comfortable with basic electrical work, carefully inspect the wiring. Otherwise, seek professional assistance.

Control Panel Problems:

• Faulty Timer: A malfunctioning timer can prevent the tanning bed from operating properly. If the timer isn't advancing, or if the session ends prematurely, it might need repair or replacement.
• Button Malfunction: If specific buttons on the control panel are unresponsive, there might be a problem with the internal wiring or the buttons themselves. This usually requires professional assistance.
• Fuse: Some tanning beds have internal fuses that protect the circuitry. If a fuse has blown, you’ll need to replace it. Refer to the tanning bed's instruction manual for the fuse location and type.

When to Call a Professional

If you've checked these points and your tanning station is still not working, it's time to call for professional help. Attempting to repair complex electrical components yourself can be dangerous. A qualified technician can diagnose and fix more intricate problems, such as:

• Internal wiring issues.
• Damaged ballasts.
• Faulty control board components.

Remember, safety is paramount. Never attempt repairs beyond your expertise. A properly functioning tanning bed is essential for safe and effective tanning.